About This System
The PiXS 500/90XL goes beyond to allow for larger and more difficult parts. The manipulator extends vertically to reach a 49” x 48” part envelop, one of the largest cabinet systems available. The 9th axis is a lateral shift of detector up to 15”. The lateral shift allows for stitching multiple scans together for a part which may be larger than the imaging detector viewing area. Powerful and flexible make this system ideal for the most challenging product.
System Capabilities
Digital Radiography: Production, In-line, CNC programmable
Software: PiXS DR (meets all NADCAP and ASTM Qualifications)
Computed Tomography: Production, In-line, Auto-CT Reconstruct, Auto-analysis, Metrology and Flaw Detection
Software: Volume Graphics Max Studio 3.2
Specs
X-ray Source
Energies: 10kV – 500kV
Types: Directional, Transmission, Sealed
Focal Spots:500kV – 0.4mm and 1.0mm
Dual tube head configuration with Mini and Micro-focus
shutters:CNC Horizontal and Vertical shutters for 500kV
X-Ray Detectors
Types: DDA – Flat Panel
Grades: Aerospace, CT Premium, ASTM
Sizes: 5″ x 5″, 8″ x 8″, 8″ x 10″, 10″ x 12″, 16″ x 16″, 17″ x 17″
Pixel Pitches: 100 micron, 127 micron, 150 micron, 200 micron
Manipulator
Axis: Up to 9 Axis
X-Ray Source Vertical Max: 50″
Horizontal Max (Stage In/Out): 48″
Detector Magnification Max: 50″
Rotation: 360° Micro-CT Stage (9″ & 18″ platter)
Tilt: +/- 30°
Max Focal Distance: 60″
Detector Travel Distance: ‘(+/- 7.5″ for image stitching)
Linear Encoders: Repeability/Accuracy
Max Scanning Envelop: 48″ x 49″
Weight: 150 lbs or more application dependant
Cabinet Size
Width: 122″
Depth: 78″
Height: 108″
Weight: ~30000lbs
Interior: A/C temperature controlled* for CT Metrology
State & Federal requirements for shielding comply with 21 CFR 1020.40 for Cabinet X-ray Systems not to exceed .5mr/hr @ 2” from all surfaces.
Workstation
Ergonomic Control Console: 27.5″ – 42.5″ height positioning (sit or stand)
Footprint: 41″ x 60″