PXS is classified as an essential business and our facility in Suwanee, GA will remain open.  If you have any immediate x-ray inspection/equipment needs, please contact us at (678) 318-8100 or Contact Us

About This System

Not every part fits into a cabinet. Specialized rooms or walk-in x-ray vaults are necessary based on part size and scope of x-ray coverage. Loading mechanisms, carts, and material handling solutions are essential to a system.

System Capabilities

Digital Radiography: Production, In-line, CNC programmable

Software: PiXS DR (meets all NADCAP and ASTM Qualifications)

Computed Tomography: Production, In-line, Auto-CT Reconstruct, Auto-analysis, Metrology and Flaw Detection

Software: Volume Graphics Max Studio 3.2

Specs

X-ray Source

Energies: 10kV – 225kV

Types: Directional, Transmission, Sealed

Focal Spots: Nano, Micro, Mini, and Macro

X-Ray Detectors

Types: DDA – Flat Panel

Grades: Aerospace, CT Premium, ASTM

Sizes: 5″ x 5″, 8″ x 8″, 8″ x 10″, 10″ x 12″, 16″ x 16″, 17″ x 17″

Pixel Pitches: 100 micron, 127 micron, 150 micron, 200 micron

Manipulator

Axis: Up to 6 Axis

Vertical Max: 26″

Horizontal Max (Stage In/Out): 24″

Detector Magnification Max: 36″

Rotation: 360° Micro-CT Rotate Stage

Tilt: +/- 30°

Max Focal Distance: 52″

Linear Encoders: Repeability/Accuracy

Max Scanning Envelop: 18″ x 24″

Cabinet Size

Width: 97″

Depth: 51″

Height: 83″

Weight: ~8000lbs

Interior: A/C temperature controlled* for CT Metrology

**State & Federal requirements for shielding comply with 21 CFR 1020.40 for Cabinet X-ray Systems not to exceed .5mr/hr @ 2” from all surfaces.

Workstation

Ergonomic Control Console: 27.5″ – 42.5″ height positioning (sit or stand)

Footprint: 41″ x 60″